#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See  for detailed information.
# In particular, see 
# 
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot"/usr"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/private/var/run

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the 
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModuleauthn_file_module libexec/apache2/mod_authn_file.so
#LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
#LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
#LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
#LoadModule authn_socache_module libexec/apache2/mod_authn_socache.so
LoadModuleauthn_core_module libexec/apache2/mod_authn_core.so
LoadModuleauthz_host_module libexec/apache2/mod_authz_host.so
LoadModuleauthz_groupfile_module libexec/apache2/mod_authz_groupfile.so
LoadModuleauthz_user_module libexec/apache2/mod_authz_user.so
#LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
#LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
#LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.so
LoadModuleauthz_core_module libexec/apache2/mod_authz_core.so
#LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.so
LoadModuleaccess_compat_module libexec/apache2/mod_access_compat.so
LoadModuleauth_basic_module libexec/apache2/mod_auth_basic.so
#LoadModule auth_form_module libexec/apache2/mod_auth_form.so
#LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
#LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so
#LoadModule file_cache_module libexec/apache2/mod_file_cache.so
#LoadModule cache_module libexec/apache2/mod_cache.so
#LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so
#LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so
#LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so
#LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so
#LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so
#LoadModule watchdog_module libexec/apache2/mod_watchdog.so
#LoadModule macro_module libexec/apache2/mod_macro.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
#LoadModule dumpio_module libexec/apache2/mod_dumpio.so
#LoadModule echo_module libexec/apache2/mod_echo.so
#LoadModule buffer_module libexec/apache2/mod_buffer.so
#LoadModule data_module libexec/apache2/mod_data.so
#LoadModule ratelimit_module libexec/apache2/mod_ratelimit.so
LoadModulereqtimeout_module libexec/apache2/mod_reqtimeout.so
#LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
#LoadModule request_module libexec/apache2/mod_request.so
#LoadModule include_module libexec/apache2/mod_include.so
LoadModulefilter_module libexec/apache2/mod_filter.so
#LoadModule reflector_module libexec/apache2/mod_reflector.so
#LoadModule substitute_module libexec/apache2/mod_substitute.so
#LoadModule sed_module libexec/apache2/mod_sed.so
#LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so
#LoadModule deflate_module libexec/apache2/mod_deflate.so
#LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so
#LoadModule proxy_html_module libexec/apache2/mod_proxy_html.so
LoadModulemime_module libexec/apache2/mod_mime.so
#LoadModule ldap_module libexec/apache2/mod_ldap.so
LoadModulelog_config_module libexec/apache2/mod_log_config.so
#LoadModule log_debug_module libexec/apache2/mod_log_debug.so
#LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
#LoadModule logio_module libexec/apache2/mod_logio.so
LoadModuleenv_module libexec/apache2/mod_env.so
#LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
#LoadModule expires_module libexec/apache2/mod_expires.so
LoadModuleheaders_module libexec/apache2/mod_headers.so
#LoadModule usertrack_module libexec/apache2/mod_usertrack.so
##LoadModule unique_id_module libexec/apache2/mod_unique_id.so
LoadModulesetenvif_module libexec/apache2/mod_setenvif.so
LoadModuleversion_module libexec/apache2/mod_version.so
#LoadModule remoteip_module libexec/apache2/mod_remoteip.so
#LoadModule proxy_module libexec/apache2/mod_proxy.so
#LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
#LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
#LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
#LoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
#LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
#LoadModule proxy_express_module libexec/apache2/mod_proxy_express.so
#LoadModule proxy_hcheck_module libexec/apache2/mod_proxy_hcheck.so
#LoadModule session_module libexec/apache2/mod_session.so
#LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so
#LoadModule session_dbd_module libexec/apache2/mod_session_dbd.so
LoadModuleslotmem_shm_module libexec/apache2/mod_slotmem_shm.so
#LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so
#LoadModule ssl_module libexec/apache2/mod_ssl.so
#LoadModule dialup_module libexec/apache2/mod_dialup.so
#LoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so
##LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.so
LoadModuleunixd_module libexec/apache2/mod_unixd.so
#LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so
#LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModulestatus_module libexec/apache2/mod_status.so
LoadModuleautoindex_module libexec/apache2/mod_autoindex.so
#LoadModule asis_module libexec/apache2/mod_asis.so
#LoadModule info_module libexec/apache2/mod_info.so
#LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
#LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so
LoadModulevhost_alias_module libexec/apache2/mod_vhost_alias.so
LoadModulenegotiation_module libexec/apache2/mod_negotiation.so
LoadModuledir_module libexec/apache2/mod_dir.so
#LoadModule p_w_picpathmap_module libexec/apache2/mod_p_w_picpathmap.so
#LoadModule actions_module libexec/apache2/mod_actions.so
#LoadModule speling_module libexec/apache2/mod_speling.so
#LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModulealias_module libexec/apache2/mod_alias.so
#LoadModule rewrite_module libexec/apache2/mod_rewrite.so
LoadModulephp5_module libexec/apache2/libphp5.so
#LoadModule perl_module libexec/apache2/mod_perl.so
LoadModulehfs_apple_module libexec/apache2/mod_hfs_apple.so


#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User_www
Group_www



# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
#  definition.  These values also provide defaults for
# any  containers you may define later in the file.
#
# All of these directives may appear inside  containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdminyou@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
#  blocks below.
#

    OptionsFollowSymLinks
    AllowOverrideall
    Orderdeny,allow
    Allowfrom all
    Satisfyall

  # AllowOverride none
   # Require all denied



#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot"/Library/WebServer/Documents"

    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    OptionsFollowSymLinks Multiviews
    MultiviewsMatchAny

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverrideNone

    #
    # Controls who can get stuff from this server.
    #
    Requireall granted


#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

    DirectoryIndexindex.php


#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#

    Requireall denied


#
# Apple specific filesystem protection.
#

    Requireall denied


    Requireall denied


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a 
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a 
# container, that host's errors will be logged there and not here.
#
ErrorLog"/private/var/log/apache2/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevelwarn


    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat"%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat"%h %l %u %t \"%r\" %>s %b" common

    
      # You need to enable mod_logio.c to use %I and %O
      LogFormat"%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a 
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per- access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog"/private/var/log/apache2/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/private/var/log/apache2/access_log" combined



    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a  section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAliasMatch^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"




    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock


#
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

    AllowOverrideNone
    OptionsNone
    Requireall granted



    #
    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
    # backend servers which have lingering "httpoxy" defects.
    # 'Proxy' request header is undefined by the IETF, not listed by IANA
    #
    RequestHeaderunset Proxy early



    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig/private/etc/apache2/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddTypeapplication/x-compress .Z
    AddTypeapplication/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml


#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /private/etc/apache2/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

TraceEnableoff

# Supplemental configuration
#
# The configuration files in the /private/etc/apache2/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include/private/etc/apache2/extra/httpd-mpm.conf

# Multi-language error messages
#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include/private/etc/apache2/extra/httpd-autoindex.conf

# Language settings
#Include /private/etc/apache2/extra/httpd-languages.conf

# User home directories
#Include /private/etc/apache2/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /private/etc/apache2/extra/httpd-info.conf

# Virtual hosts

Include/private/etc/apache2/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /private/etc/apache2/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /private/etc/apache2/extra/httpd-dav.conf

# Various default settings
#Include /private/etc/apache2/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1

Include/private/etc/apache2/extra/proxy-html.conf


# Secure (SSL/TLS) connections
#Include /private/etc/apache2/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#

SSLRandomSeedstartup builtin
SSLRandomSeedconnect builtin


Include/private/etc/apache2/other/*.conf

新闻标题：mac下php环境apachehttpd.conf
本文链接：http://hbruida.cn/article/jihcss.html