这篇文章将为大家详细讲解有关linux中Nagios怎么安装，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。

创新互联成立于2013年，是专业互联网技术服务公司，拥有项目成都做网站、成都网站制作网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元宝山做网站,已为上家服务,为宝山各地企业和个人服务,联系电话:13518219792

一、Nagios服务端安装

1、安装所需依赖关系包

2、添加Nagios所需用户及组

3、编译安装Nagios及创建登陆Nagios WEB程序用户

4、Nagios-plugin(插件)

5、配置服务自启动

二、基于NRPE配置Nagios监控Win主机

  1、被监控端

      安装：NSClient++-0.3.9-x64

  2、监控端

      1.测试与被监控端连通性

      2.监控端定义命令、定义主机、定义服务

      3.将定义好的模板加入到nagios.cfg文件中

      4.重启服务

三、基于NRPE监控Linux主机

  1、被监控端：

      1.添加用户

     2.安装插件nagios-plugins-1.4.15

      3.安装NRPE

      4.配置NRPE配置文件

           #vi /usr/local/nagios/etc/nrpe.cfg

     5.定义nrpe启动脚本且增加权限

     6.添加自启动

     7.启动服务

  2、配置监控端：

     1.安装NRPE

        安装完成后，生成check_nrpe，使用此插件进行测试被监控主机

     2.定义命令

     3.定义主机和服务

     4.将定义好的linhost.cfg配置文件的路径添加至/usr/localhost/etc/nagios.cfg中

     5.测试配置文件  /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg

     6.重启服务

     7.网页检查hosts监控状况

******另关于基于NRPE监控windows主机,另行查询网上资料******

一、安装配置Nagios

1、解决安装Nagios的依赖关系：

# yum -y install httpd gcc glibc glibc-common gd gd-devel php php-mysql mysql mysql-devel mysql-server

2、添加nagios运行所需要的用户和组：

# groupadd nagcmd

# useradd -G nagcmd nagios

# passwd nagios

# usermod -a -G nagcmd apache

3、编译安装nagios：

# tar zxf nagios-3.3.1.tar.gz

# cd nagios-3.3.1

# ./configure --with-command-group=nagcmd --enable-event-broker

# make all

# make install

# make install-init

# make install-commandmode

# make install-config

# vi /usr/local/nagios/etc/objects/contacts.cfg

emailnagios@localhost      #这个是默认设置

# make install-webconf

# htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin

# service httpd restart

4、编译、安装nagios-plugins

# tar zxf nagios-plugins-1.4.15.tar.gz

# cd nagios-plugins-1.4.15

# ./configure --with-nagios-user=nagios --with-nagios-group=nagios

# make

# make install

5、配置并启动Nagios

 #vi /usr/local/nagios/etc/nagios.cfg

# chkconfig --add nagios

# chkconfig nagios on

# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg

# service nagios start

6、配置selinux

#getenforce

#setenforce 0

7、通过web界面查看nagios：

http://your_nagios_IP/nagios

登录时需要指定前面设定的web认证帐号和密码。

二、配置文件

Nagios的主配置文件

 /usr/local/nagios/etc/nagios.cfg

Nagios模板配置目录

/usr/local/nagios/etc/objects

调用check命令目录/usr/local/nagios/libexec

三、基于NSClinet++  监控远程Win主机

1、安装配置被监控端

  安装NSClient++-0.3.9-x64

2、进行测试是否连通

#cd /usr/local/nagios/libexec

#./check_nt -H 192.168.1.119 -v UPTIME -p 12489

如有密码则：#./check_nt -H 192.168.1.119 -v UPTIME -p 12489 -s luoxj,123

3、监控端进行配置

&&&定义commands.cfg-------------------定义命令

 #cd /usr/local/nagios/etc/objects/

 #vi commands.cfg

define command{

    command_name   check_nt

    command_line   $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$

    }

&&&定义主机及服务

#vi windows.cfg

define host{

    use       windows-server

    host_name    winhost

    alias      My Windows Host

    address     192.168.1.119

    }

define service{    use           generic-service    host_name        winhost    service_description   NSClient++ Version    check_command      check_nt!CLIENTVERSION    }定义服务可根据实际情况进行变更名称可使用vim中替换进行：.,$s@winserver@winhost@g

&&&启用定义的文件，增加定义文件路径

#vi /usr/local/nagios/etc/nagios.cfg

cfg_file=/usr/local/nagios/etc/objects/windows.cfg

&&&进行测试，以确定配置文件没有问题

# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg -d

#service nagios restart

四、基于NRPE监控远程Linux主机

1、安装配置被监控端

   1）先添加nagios用户

   # useradd -s /sbin/nologin nagios

   2）NRPE依赖于nagios-plugins，因此，需要先安装之

   # tar zxf nagios-plugins-1.4.15.tar.gz

   # cd nagios-plugins-1.4.15

   # ./configure --with-nagios-user=nagios --with-nagios-group=nagios

   # make all

   # make instal

   3）安装NRPE

   # tar -zxvf nrpe-2.12.tar.gz

   # cd nrpe-2.12.tar.gz

   # ./configure --with-nrpe-user=nagios \

   --with-nrpe-group=nagios \

   --with-nagios-user=nagios \

   --with-nagios-group=nagios \

   --enable-command-args \

   --enable-ssl

   # make all

   # make install-plugin

   # make install-daemon

   # make install-daemon-config

   4）配置NRPE

   # vim /usr/local/nagios/etc/nrpe.conf

   log_facility=daemon

   pid_file=/var/run/nrpe.pid

   server_address=172.16.100.11

   server_port=5666

   nrpe_user=nagios

   nrpe_group=nagios

   allowed_hosts=172.16.100.1

   command_timeout=60

   connection_timeout=300

   debug=0

  &&&&&&&&定义监控对象命令&&&&&&&&&

   command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10

   command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20

   command[check_sda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sda1

   command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z

   command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200

   5）启动NRPE

   # /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg –d

   为了便于NRPE服务的启动，可以将如下内容定义为/etc/init.d/nrped脚本：

  #vi /etc/init.d/nrped

   #!/bin/bash

   # chkconfig: 2345 88 12

   # description: NRPE DAEMON

NRPE=/usr/local/nagios/bin/nrpe

NRPECONF=/usr/local/nagios/etc/nrpe.cfg

case "$1" in

       start)

              echo -n "Starting NRPE daemon..."

              $NRPE -c $NRPECONF -d

              echo " done."

              ;;

       stop)

              echo -n "Stopping NRPE daemon..."

              pkill -u nagios nrpe

              echo " done."

       ;;

       restart)

              $0 stop

              sleep 2

              $0 start

              ;;

       *)

              echo "Usage: $0 start|stop|restart"

              ;;

       esac

exit 0

  #chmod +x /etc/init.d/nrped

  #service nrped start

   #netstat -tnlp  ##检查nrpe端口5666是否启用

      tcp     0    0 0.0.0.0:5666         0.0.0.0:*          LISTEN    17282/nrpe

  #service iptables stop

  #setenforce 0

   6）配置允许远程主机监控的对象

   在被监控端，可以通过NRPE监控的服务或资源需要通过nrpe.conf文件使用命令进行定义，定义命令的语法格式为：command[]=。比如：

   command[check_rootdisk]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /

   command[check_swap]=/usr/local/nagios/libexec/check_disk -w 40% -c 20%

   command[check_sensors]=/usr/local/nagios/libexec/check_sensors

   command[check_users]=/usr/local/nagios/libexec/check_users -w 10 -c 20

   command[check_load]=/usr/local/nagios/libexec/check_load -w 10,8,5 -c 20,18,15

   command[check_zombies]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z

   command[check_all_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200

2、配置监控端

1）安装NRPE

# tar -zxvf nrpe-2.12.tar.gz

# cd nrpe-2.12.tar.gz

# ./configure --with-nrpe-user=nagios \

--with-nrpe-group=nagios \

--with-nagios-user=nagios \

--with-nagios-group=nagios \

--enable-command-args \

     --enable-ssl

# make all

# make install-plugin

安装完成后，/usr/local/nagios/libexec/check_nrpe就会生成此插件，可测试客户端工作正常于否

#cd /usr/local/nagios/libexec/

#./check_nrpe -H 192.168.1.124

NRPE v2.12

2）定义如何监控远程主机及服务：

通过NRPE监控远程Linux主机要使用chech_nrpe插件进行，其语法格式如下：

check_nrpe -H [-n] [-u] [-p ] [-t ] [-c ] [-a ]

定义监控远程Linux主机的命令：

#vi /usr/local/nagios/etc/objects/commands.cfg  添加nrpe命令

define command{

    command_name   check_nrpe

    command_line   $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$

}

************建立模板文件******************

#cd /usr/local/nagios/etc/objects/

#vim linhost.cfg  或是  #cp localhost.cfg linhost.cfg

 ***定义远程Linux主机：

define host{

    use           linux-server

     host_name     linhost

    alias          my Linux Host

    address        192.168.1.124

    }

如主机组不需要则注释，添加服务可参照被监控端/usr/local/nagios/etc/nrpe.cfg中的command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20command[check_sda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/sda1command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Zcommand[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200 进行详细配置服务 ***定义远程Linux服务：也可以在后加参数进行设定监控
 define service{
    use           generic-service    host_name        linhost    service_description   check_users    check_command      check_nrpe!check_users    }# Create a service for monitoring the uptime of the server
# Change the host_name to match the name of the host you defined abovedefine service{    use           generic-service    host_name        linhost    service_description   load    check_command      check_nrpe!check_load    }# Create a service for monitoring CPU load
# Change the host_name to match the name of the host you defined abovedefine service{    use           generic-service    host_name        linhost    service_description   sda1    check_command      check_nrpe!check_sda1    }# Create a service for monitoring memory usage
# Change the host_name to match the name of the host you defined abovedefine service{    use           generic-service    host_name        linhost    service_description   Zombie    check_command      check_nrpe!check_zombie_procs    }define service{    use           generic-service    host_name        linhost    service_description   Total procs    check_command      check_nrpe!check_total_procs    }3）将设定好的linhost.cfg文件添加至/usr/local/nagios/etc/nagios.cfg中#vi /usr/local/nagios/etc/nagios.cfg

cfg_file=/usr/local/nagios/etc/objects/linhost.cfg

4）进行测试配置文件 # /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg5）重启服务#service nagios restart

关于“linux中Nagios怎么安装”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。

另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。

网站题目：linux中Nagios怎么安装-创新互联
路径分享：http://hbruida.cn/article/cdegie.html